Value,Failure Response Message Name,Reference
0,Reserved,
1,Unspecified reason not covered by other failure codes.,[RFC3292]
2,Invalid request message.,[RFC3292]
3,The specified request is not implemented on this switch.,[RFC3292]
4,One or more of the specified ports does not exist.,[RFC3292]
5,Invalid Port Session Number.,[RFC3292]
6,One or more of the specified ports is down.,[RFC3292]
7,Invalid Partition ID.,[RFC3292]
8-9,Unassigned,
10,"General message failure. (The meaning of this               
failure code depends upon the Message Type. It is
defined within the description of any message that
uses it.)",[RFC3292]
11,The specified connection does not exist,[RFC3292]
12,The specified branch does not exist.,[RFC3292]
13,One or more of the specified Input Labels is invalid,[RFC3292]
14,One or more of the specified Output Labels is invalid.,[RFC3292]
15,Point-to-point bi-directional connection already exists.,[RFC3292]
16,"Invalid service selector field in a connection              
management message.",[RFC3292]
17,Insufficient resources for QoS profile.,[RFC3292]
18,Insufficient resources.,[RFC3292]
19,"Out of resources (e.g. memory exhausted, etc.).",[RFC3292]
20,Reservation ID out of Range,[RFC3292]
21,Mismatched reservation ports,[RFC3292]
22,Reservation ID in use,[RFC3292]
23,Non-existent reservation ID,[RFC3292]
24,"ATM virtual path switching is not supported on              
this input port.",[RFC3292]
25,"Point-to-multipoint ATM virtual path connections            
are not supported on either the requested input
port or the requested output port.",[RFC3292]
26,"Attempt to add an ATM virtual path connection               
branch to an existing virtual channel connection.",[RFC3292]
27,"Attempt to add an ATM virtual channel connection            
branch to an existing virtual path connection.",[RFC3292]
28,"ATM Virtual Path switching is not supported on              
non-ATM ports.",[RFC3292]
29,"A branch belonging to the specified point-to-               
multipoint connection is already established on the
specified output port and the switch cannot support
more than a single branch of any point-to-multipoint
connection on the same output port.",[RFC3292]
30,"The limit on the maximum number of point-to-                
multipoint connections that the switch can support
has been reached.",[RFC3292]
31,"The limit on the maximum number of branches that            
the specified point-to-multipoint connection can
support has been reached.",[RFC3292]
32,"Cannot label each output branch of a point-to-multipoint    
tree with a different label.",[RFC3292]
33,"Cannot add multi-point branch to bi-directional             
connection.",[RFC3292]
34,"Unable to assign the requested Label value to the           
requested branch on the specified point-to-multipoint
connection.",[RFC3292]
35,"General problem related to the manner in which              
point-to-multipoint is supported by the switch.",[RFC3292]
36,Replace of connection is not activated on switch.,[RFC3292]
37,"Connection replacement mode cannot be combined              
with Bi-directional or Multicast mode.",[RFC3292]
40,Cannot support one or more requested label ranges.,[RFC3292]
41,Cannot support disjoint label ranges.,[RFC3292]
42,Specialised multipoint labels not supported.,[RFC3292]
43,"The transmit data rate of this output port cannot           
be changed.",[RFC3292]
44,"Requested transmit data rate out of range for this          
output port.",[RFC3292]
45,Connection Replace mechanism not supported on switch.,[RFC3292]
46,Labels are still used in the existing Label Range.,[RFC3292]
47-59,Unassigned,
60-79,Reserved for Vendor Private Extensions,[RFC3292]
80,"Switch does not support different QoS parameters            
for different branches within a multipoint connection.",[RFC3292]
81-127,Unassigned,
128-159,Reserved for Vendor Private Extensions,[RFC3292]
160-255,Unassigned,